RS-3000/3500 FAP-BZ
Buzzer Alarm Liquid Leak Sensor
The Buzzer Alarm Series provides quick leak detection with an audible alarm system. For use with corrosive liquids. Atmosphere resistant and completely waterproof.
Specification Charts:
Product Operation Manuals:
RS-3000/3500FAP-BZ Detection Unit
Buzzer Alarm Liquid Leak Sensor
- Quick detection by spot where the liquid leakage occurs.
- RS-3000FAP-BZ (NPN OUTPUT) & RS-3500FAP-BZ (PNP OUTPUT) are suitable for the large scale and complex factory.
- Alarm beep freeze when detection are taken out of Bracket.
- In a complex and large factory, “sound” saves time for locating where the leakage happens.
- RS-3500 matches with safety circuit design of zero voltage common grounded as PNP configuration is so.
- Using Control unit of RS-3500C, you can choose a neutral relay contact output. Furthermore RS-3500C provides a logically accumulated output from 8 input signal sources to one output, this is the same idea of RS-3000C.
| RS-3000/3500FAP-BZ Detection Unit Specification | |||||
| RS-3000FAP-BZ | RS-3500FAP-BZ | ||||
| Input Voltage | 24 VDC ± 10% | ||||
| Power Consumption | 30mA below | ||||
| Output | NPN transistor open collector, 50mA max, Normal: ON | PNP transistor open collector, 50mA max, Normal: ON | |||
| Functions | LED Lamp | Buzzer | Output Signal | ||
| Normal Status | Green Stable ON | OFF | ON | ||
| Leak Status | Red Flicker ON | ON | OFF | ||
| Wrong location | Red Flicker ON | OFF | OFF | ||
| Control Unit | Available with RS-3000C | Available with RS-3500C | |||
| Ambient Temperature | -10 to 60 deg C (14 to 140 deg F) | ||||
| Material | Case | PFA | |||
| Cable | FEP | ||||
| LED Lamp | Epoxy (Embedded in the case) | ||||
| Waterproofing | Sealed, Equivalent IP67(IEC) | ||||
| Weight | Approx. 55g | ||||
| Absorbent Paper | Not Required | ||||
| Selectable Bracket | P/N-6716 : Stainless Steel P/N-6720B : PVC | ||||
| RS-3000 Series Control Unit Specification | |||||
| RS-3000C | |||||
| Input Voltage | 24 VDC ± 10% | ||||
| Power Consumption | 200mA below | ||||
| Number Of Input | 1 to 8 detection units max | ||||
| Indication Of LED | Independent display for each Input (LED 8ea ×Green or Red either color) Normal status: Greed, Leakage or Wrong Position Alarm: Red | ||||
| Output | Relay contact × 1ea Normal status: Closed Leakage or Wrong Position Alarm: Open Power Failure: Open | ||||
| Output Capacity | 24 VDC,1A (resistance load) | ||||
| Ambient Temperature | -10 to 60 deg C (14 to 140 deg F) | ||||
| Case Material | ABS polymer | ||||
| Weight | Approx. 100g | ||||
| Wiring Connection | Input: Connector × 8ea (insert - locked) Power/Output: Connector × 1ea (insert - locked) | ||||
| Installation | Snap-on DIN Rail, or screwed on the base plate. | ||||
| Detection Unit | RS-3000FA, RS-3000FAP | ||||
| RS-3500 Series Control Unit Specification | |||||
| RS-3500C | |||||
| Input Voltage | 24 VDC ± 10% | ||||
| Power Consumption | 200mA below | ||||
| Number Of Input | 1 to 8 detection units max | ||||
| Indication Of LED | Independent display for each Input (LED 8ea ×Green or Red either color) Normal status: Greed, Leakage or Wrong Position Alarm: Red | ||||
| Output | Relay contact × 1ea Normal status: Closed Leakage or Wrong Position Alarm: Open Power Failure: Open | ||||
| Output Capacity | 24 VDC,1A (resistance load) | ||||
| Ambient Temperature | -10 to 60 deg C (14 to 140 deg F) | ||||
| Case Material | ABS polymer | ||||
| Weight | Approx. 100g | ||||
| Wiring Connection | Input: Connector × 8ea (insert - locked) Power/Output: Connector × 1ea (insert - locked) | ||||
| Installation | Snap-on DIN Rail, or screwed on the base plate. | ||||
| Detection Unit | RS-3500FA, RS-3500FAP | ||||
We Thank you for visiting our home page and hope you will find it valuable and informative.